LED Tape – LED96SV

Specifications & Install PDF

LED96SV

9.6W Side Emitting LED Strip
With 120 LEDs per metre, LED96SV features the same angled LEDs as LED48SV but with a far higher lumen output.

Available Options

Colour

3000K White
6000K White

IP Rating

IP20

Voltage

12V
24V

Technical Specification

Part Code LED96SV-12V-IP20-3K
LED96SV-12V-IP20-6K
Ip Rating IP20
Voltage 12V DC
Wattage 9.6W / m
Width 8mm
Height 2mm
Lumens 3000K 720lm / m
Lumens 4000K 740lm / m
Lumens 6000K 820lm / m
LED Chip 3350
LEDs Per Metre 120
Cutting Increment 25mm
Maximum Run Length 5m
Beam Angle 120º
Working Temperature -10ºC to 45ºC
Average Illumination Time
30000 hours
Warranty 3 years

How To Buy

Contact Us

Phone or email us to find the best way to buy our products.

CONTACT US

* DISCLAIMERS
Colour option availability based on IP20 or IP33 version of LED ribbon. IP65, IP67 & IP68 versions may only be available in a limited selection of colour options shown.
Lumen outputs are depicted at the maximum level during testing under optimal conditions. Actual levels may vary depending on a number of external factors.
While we do our best to maintain colour consistency this may vary between batches. When ordering repeat items we cannot guarantee that the item supplied will be from the same batch as previous purchases. All purchases made at the same time will be supplied from LED ribbon of the same batch.
Average illumination times are based on LED chip brightness reduction to 70% of the original brightness under optimal conditions. External factors may decrease illumination lifetime. Illumination time does not reflect the expected wear of other parts used to manufacture the LED ribbon, which are covered by warranty.