LED Tape – LED150AA

Specifications & Install PDF

LED150AA

15.0W Adjustable Angled LED Strip

With LEDs mounted onto the edge of the PCB, this strip allows for the individual LEDs to be angled down towards the product or surface.

Available Options

Colour

3000K White
4000K White
6000K White

IP Rating

IP20

Voltage

24V

Technical Specification

Part Code LED150AA-24V-IP20-3K
LED150AA-24V-IP20-4K
LED150AA-24V-IP20-6K
Ip Rating IP20
Voltage 24V DC
Wattage 15.0W / m
Width 7mm
Height 2mm
Lumens 3000K 1400lm / m
Lumens 4000K 1550lm / m
Lumens 6000K 1650lm / m
LED Chip 5630
LEDs Per Metre 70
Cutting Increment 100mm
Maximum Run Length 10m
Beam Angle 115º
Working Temperature -10ºC to 45ºC
Average Illumination Time
30000 hours
Warranty 3 years

How To Buy

Contact Us

Phone or email us to find the best way to buy our products.

CONTACT US

* DISCLAIMERS
Colour option availability based on IP20 or IP33 version of LED ribbon. IP65, IP67 & IP68 versions may only be available in a limited selection of colour options shown.
Lumen outputs are depicted at the maximum level during testing under optimal conditions. Actual levels may vary depending on a number of external factors.
While we do our best to maintain colour consistency this may vary between batches. When ordering repeat items we cannot guarantee that the item supplied will be from the same batch as previous purchases. All purchases made at the same time will be supplied from LED ribbon of the same batch.
Average illumination times are based on LED chip brightness reduction to 70% of the original brightness under optimal conditions. External factors may decrease illumination lifetime. Illumination time does not reflect the expected wear of other parts used to manufacture the LED ribbon, which are covered by warranty.