LED Tape – LED144HD

Specifications & Install PDF

LED144HD

14.4W LED Strip
LED144HD uses next-generation 2835 LEDs to provide even more output than LED96 whilst maintaining the same appearanceof uniformed light.

Available Options

Colour

3000K White
4000K White
6000K White

IP Rating

IP20

Voltage

24V

Technical Specification

Part Code LED144HD-24V-IP20-3K
LED144HD-24V-IP20-4K
LED144HD-24V-IP20-6K
Ip Rating IP20
Voltage 24V
Wattage 14.4W / m
Width 8mm
Height 2mm
Lumens 3000K 1000lm / m
Lumens 4000K 1200lm / m
Lumens 6000K 1300lm / m
LED Chip 2835
LEDs Per Metre 120
Cutting Increment 55mm
Maximum Run Length 10m
Beam Angle 120º
Working Temperature -10ºC to 45ºC
Average Illumination Time
30000 hours
Warranty 3 years

How To Buy

Contact Us

Phone or email us to find the best way to buy our products.

CONTACT US

* DISCLAIMERS
Colour option availability based on IP20 or IP33 version of LED ribbon. IP65, IP67 & IP68 versions may only be available in a limited selection of colour options shown.
Lumen outputs are depicted at the maximum level during testing under optimal conditions. Actual levels may vary depending on a number of external factors.
While we do our best to maintain colour consistency this may vary between batches. When ordering repeat items we cannot guarantee that the item supplied will be from the same batch as previous purchases. All purchases made at the same time will be supplied from LED ribbon of the same batch.
Average illumination times are based on LED chip brightness reduction to 70% of the original brightness under optimal conditions. External factors may decrease illumination lifetime. Illumination time does not reflect the expected wear of other parts used to manufacture the LED ribbon, which are covered by warranty.