LED Tape – LED144

Specifications & Install PDF

LED144

14.4W LED Strip
LED144 is perfect for applications which require high levels of illumination. Comparable to the output of a T8 tube, this strip can often be used for primary lighting.

Available Options

Colour

2700K White
3000K White
4000K White
6000K White
Red
Blue

IP Rating

IP20
IP65

Voltage

12V
24V

Technical Specification

Part Code LED144-12V-IP20-27K
LED144-12V-IP20-3K
LED144-12V-IP20-4K
LED144-12V-IP20-6K
LED144-24V-IP20-27K
LED144-24V-IP20-3K
LED144-24V-IP20-4K
LED144-24V-IP20-6K
LED144-12V-IP65-27K
LED144-12V-IP65-3K
LED144-12V-IP65-4K
LED144-12V-IP65-6K
Ip Rating IP20 IP20 IP65
Voltage 12V DC 24V DC 12V DC
Wattage 14.4W / m 14.4W / m 14.4W / m
Width 10mm 10mm 12mm
Height 2mm 2mm 3mm
Lumens 2700K 760lm / m 760lm / m 900lm / m
Lumens 3000K 1000lm / m 1000lm / m 1000lm / m
Lumens 4000K 1100lm / m 1100lm / m 1100lm / m
Lumens 6000K 1200lm / m 1200lm / m 1200lm / m
LED Chip 5050 5050 5050
LEDs Per Metre 60 60 60
Cutting Increment 50mm 100mm 50mm
Maximum Run Length 5m 10m 5m
Beam Angle 120º 120º 120º
Working Temperature -10ºC to 45ºC -10ºC to 45ºC -10ºC to 45ºC
Average Illumination Time
30000 hours
30000 hours 30000 hours
Warranty 3 years 3 years 3 years

How To Buy

Contact Us

Phone or email us to find the best way to buy our products.

CONTACT US

* DISCLAIMERS
Colour option availability based on IP20 or IP33 version of LED ribbon. IP65, IP67 & IP68 versions may only be available in a limited selection of colour options shown.
Lumen outputs are depicted at the maximum level during testing under optimal conditions. Actual levels may vary depending on a number of external factors.
While we do our best to maintain colour consistency this may vary between batches. When ordering repeat items we cannot guarantee that the item supplied will be from the same batch as previous purchases. All purchases made at the same time will be supplied from LED ribbon of the same batch.
Average illumination times are based on LED chip brightness reduction to 70% of the original brightness under optimal conditions. External factors may decrease illumination lifetime. Illumination time does not reflect the expected wear of other parts used to manufacture the LED ribbon, which are covered by warranty.